BeoVision 7 - 32 LCD Television
Manufactured: 2004 - 2011
Designer: David Lewis
Colours: Silver, Dark Grey, Black, Blue, Red
"BeoVision 7 is more than just a TV; it’s a complete entertainment system specially created to offer a sound and picture experience far beyond expectations. With its 81cm LCD screen, built-in DVD player and powerful active loudspeaker system, BeoVision 7 offers all the benefits of flat-screen viewing, but with exceptional sound performance as well."
BeoVision 7 combines both an 81cm LCD monitor with an integrated DVD Player, DSS surround sound module and a dedicated loudspeaker in BeoLab 7-1. The concept emphasises the separation of picture and sound together with a good number of placement options. With BeoLab 7-1 the very highest level of acoustic performance is delivered. BeoVision 7 has a higher display resolution than that of BeoVision 6 - 26: 1366 x 768 (WXGA) pixels against 1280 x 768 pixels of BeoVision 6.
BeoVision 7 may be used as either a stand-alone television set or as a large-screen monitor within a domestic surround-sound system. There are five different stand placement options available to the user:
Mounting Options & Stands
Original Bang & Olufsen stands available at launch included: Fixed position Table Stand, motorised Table Stand, motorised Table Stand, moveable Wall Bracket for TV and Loudspeaker (close or extended versions) and a motorised Floor Stand. A fixed Wall Bracket for BeoVision 7 32 was added to the stand portfolio after launch.
Bang & Olufsen's preferred supplier for brackets and stands, STBbrackets have made a range of solutions specifically for this model. Distributed throughout the World by the Bang & Olufsen store network, the STB options add to the diversity of mounting options and positions available.
»Ceiling Mounts & Floor Stands
»Wall Mounting Brackets
STB have a range of mounting options to allow Blu-ray players, decoder boxes and games consoles to be mounted at the rear of the TV.
BeoVision 7 offers the following as standard:
Dolby Digital/DTS Surround Sound
Set-Top Box Controller
DVI PC input
BeoVision 7 - 1816089
Table Stand - 1409766
Wall Bracket – Fixed - 1409511
Motorised Floor Stand - 1409111
Wall Bracket – Moveable - 1409611
Motorised Table Stand - 1409211
BeoVision 7 Press Release December 2004
Exceptional sound and that’s just half the picture
Bang & Olufsen has now released the BeoVision 7 television, offering complete home entertainment with a 32” LCD widescreen, integrated DVD player and digital surround sound module, and a three-way, stereo loudspeaker system of exceptional performance.
The BeoVision 7 television continues the Bang & Olufsen tradition of idea-based products, focusing on a unique design process, attention to detail, and on ensuring the optimal balance between sound, picture, and the complete user interaction and experience. The LCD monitor offers the best possible picture in all situations with full application of Bang & Olufsen’s picture optimising technologies, and the dedicated loudspeaker system incorporates breakthrough acoustic technologies previously seen in the BeoLab range of loudspeakers.
“With the introduction of the BeoVision 7 television, we have broadened an already impressive television portfolio,” says Torben Ballegaard Sørensen, CEO, Bang & Olufsen; “BeoVision 7 represents the complete television solution with its built-in DVD and versatile placement – whether it is used stand-alone or as part of a home cinema solution. Like all Bang & Olufsen products, BeoVision 7 brings its own unique expressive qualities to the home.”
The complete television
Utilising the latest LCD picture technology and with an integrated DVD player, the BeoVision 7 television offers superb sound and picture experiences. As a stand-alone television, watching films on the 32” widescreen is supported by the powerful loudspeaker system. The integrated digital surround sound module offers the ultimate in home cinema together with any loudspeakers from the BeoLab range, without the need for an extra box or cables.
In addition to the integrated DVD player and digital surround sound module, BeoVision 7 also has a Set Top Box controller module as standard, offering access to satellite channels using the Beo4 remote control. There are also connections for earphones, external entertainment sources and BeoLab loudspeakers, as well as for digital interface with a PC.
Using a Bang & Olufsen product is always a pleasurable experience, and the BeoVision 7 television is no exception. When switched on, the electronic curtains open, and, when activated, the DVD loader swings out from below the screen in a silent, smooth motion. The vertical display text provides instant recognition of the TVs operational status, volume, and the entertainment source, and is placed to the right of the widescreen so as not to break the design lines.
Genuine loudspeaker concept – Optimised for television
The loudspeaker system for the BeoVision 7 television has been designed as a genuine Bang & Olufsen loudspeaker concept. The loudspeaker cabinet is cast in a single piece of aluminium, and is fronted by a natural-coloured anodised aluminium grill. The loudspeaker extends beyond the limits of the picture screen and is mounted separately, emphasising the sound performance as well as visually accentuating the presence of sound as an integral part of the viewing experience.
Built with Active Loudspeaker technology, the loudspeaker contains six ICEPower amplifiers built into 3 stereo units in a three-way bass reflex loudspeaker system. The loudspeaker is equipped with thermal protection circuits and Adaptive Bass Linearisation (ABL), which ensures that the loudspeaker performs without distortion, even at very high volume. Each loudspeaker is individually calibrated to the same standard prior to leaving the factory, and has two bass presets for room adaptation, for wall or free-standing placement.
The best possible picture in all situations
Bang & Olufsen’s skills with the VisionClear package of picture technologies ensure the best possible picture from the LCD monitor in all situations. VisionClear covers a range of technologies that the viewer experiences in the form of greater viewing comfort, and the BeoVision 7 television represents the complete application of VisionClear. When BeoVision 7 is switched on, the TV automatically adjusts picture quality to match the current light conditions – and will carry on doing so until the television is switched off again. The anti-reflection coating on the contrast screen reduces significantly the effect of incoming light on the screen, offering pleasurable viewing even in strong daylight.
Place & enjoy anywhere
The versatile and expressive character of the BeoVision 7 television changes to fit the room. Place it on a floor or table stand, or hang it on one of the wall brackets, and the convenience of the flat screen allows for almost unlimited placement. Furthermore, the manual and motorised turn and tilt options ensure that the viewer always has the best viewing conditions.
The BeoVision 7 can enter into any home system with other Beolink-enabled Bang & Olufsen audio and loudspeaker products. Beolink is Bang & Olufsen’s unique home integration system, based on the principle of ‘move and share the experience – not the equipment’, with everything controlled by the Beo4 remote control.
Unprecedented attention to detail
The BeoVision 7 television illustrates once again Bang & Olufsen’s leading standards of design and craftsmanship in manufacturing. The LCD monitor and dark front glass are placed against a visually appealing brushed aluminium frame. Production processes have been specially tailored to ensure the finished product matches the original design idea. The brushed aluminium frame and the ‘swing’ opening of the DVD loader are just two examples of this attention to detail and an idea-led product development process that makes a Bang & Olufsen product unique.
“Bang & Olufsen offers personal viewing and listening solutions that really need to be seen and heard to be appreciated. Our flat TV portfolio offers the flexible and elegant BeoVision 6 family, the modular BeoVision 4 family with freedom for a personalised Bang & Olufsen experience, and the ultimate plasma experience of the BeoVision 5,” explains Torben Ballegaard Sørensen, and concludes: “And now we have the BeoVision 7, the complete television for any situation, with the best sound yet heard from a TV – you really have to experience this TV.”
All Bang & Olufsen products present levels of craftsmanship and pleasurable experience that need to be experienced ‘live’. Bang & Olufsen retailers are always ready to present our products in a variety of user environments and setups, and the shop is where the true benefits of having Bang & Olufsen ‘at home’ are first revealed.
BeoVision 7 - 32 LCD Television Product Specifications
BeoVision 7 - 32 MKI: 9310 - 9320
BeoVision 7 - 32 MKII: 9321 - 9329
BeoVision 7 - 32 MKIII: 9331 - 9339, MKIII TV: 9341 - 9350, 9399
BeoVision 7 - 32 MKIV: 9171 - 9180
BeoVision 7 - 32 MKV: 9781 - 9190
BeoVision 7 Specifications:
Power consumption:Typically 152W / Standby 1W
Terminal included: Beo 4
LCD Panel: 32" 16:9 TFT LCD
Resolution: 1366 x 768 (WXGA)
Display colours: 16.7 million (true)
Luminance of white (centre of screen): Typical 450 cd/m2
Contrast ratio (centre of screen): Typically 1000:1 (min. 700:1); MK3 onwards 3000:1
Response time: Typically 8 m/sec. (falling), 16 m/sec. (rising)
Viewing angle: Typically 85 degrees (min. 75 degrees) both vertical and horizontal
Contrast screen: Glass with Anti-Reflective Coating
VisionClear Picture Engine
Adaptive Black Levelling
Digital Adaptive Dynamic Luminance Peaking
Digital Adaptive Noise Reduction
Digital Colour Transient Improvement
Motion Compensated Film Mode
Automatic Picture Control
Teletext (where available)
Wide Screen Signalling (WSS)
VPT (Video Programming by Teletext)
Auto tune, program move and automatic naming
Tuner range: 45 - 860 MHz, VHF, S, Hyper, UHF
TV programmes: 99
Stereo decoders: A2 + NICAM
Format 1: 16:9 Panorama - 15:9 Panorama - (4:3 only active via setup in Service Mode)
Format 2: Letterbox + Soft Scroll
Format 3: 16:9
Automatic format optimization via "Black Bar Detection"
16:9 detection on all SCART inputs
Support of WSS (Wide Screen Signalling pulses) from broadcaster
Disc sizes: 12cm
Frequency range: 20Hz - 20KHz
Supported file types: DVD-Video, Video CD, CD-DA, CD-R, CD-RW, CD-MP3
Signal-to-noise-ratio: Typical 100 dB, A weighted, in Audio mode
DVD Region: According to type
Set Top Box Controller (STB-C):
Inbuilt, with control of up to two peripheral devices via Infra-Red cable
Input TV: 75 ohms aerial female
Output Splitter/Modulator: 1 x 75 ohms aerial male
Input DTV (Optional DVB-S kit): F-connector
3 x SCART sockets (AV1, 2 & 3):
AV1 : CVBS in/out, RGB in, Y/C in (automatic Y/C detect, automatic 16:9 sense (pin-8), B&O AVL(2-way))
AV2 : CVBS in/out, RGB in, Y/C in (automatic Y/C detect, automatic 16:9 sense (pin-8), B&O AVL(1-way))
AV3 : CVBS in, RGB in, (automatic 16:9 sense (pin-8), B&O AVL(1-way))
2 x HDMI input (MKV specification only)
Digital audio inputs: 4 x coax phono
Camcorder/Auxiliary: 3 x Phono sockets (video in/audio L-R in), auto detection (video)
Headphone Output: 3.5mm Mini-Jack
BeoLink®: MasterLink Connection
[B]BeoLink® video distribution:[/B[ 75 ohms aerial male (splitter/system modulator output)
External BeoLab speaker outputs: 2 x Centre, 2 x Front, 2 x Rear, 1 x Subwoofer, 1 x Extended Cinema Centre
PC input: DVI-I connector/Phono Video (CVBS) + audio L-R in (can be used to view HDTV on MKIII and above)
Projector output: D-sub ( VGA 15 pin female)
External IR receiver: Mini-Jack
Digital Satellite module (DVB-S) / Digital Terrestrial Modules (DVB-T, DVB-HD)
Frequently Asked Questions
Created: 15th December 2006
Modified: 28th April 2015